We refinished this mahogany entry door on St. Simons Island, including its sidelights, transoms and trim, by stripping the old finish down to raw wood and building a new stain and clear coat system. The homeowner called after the door had been finished with a product that was not right for mahogany.
Project at a glance
- Location: St. Simons Island, GA
- Project type: Exterior wood door refinishing
- Scope: Mahogany entry door, sidelights, transoms and trim
- Prep: Existing clear coats and stain removed down to raw wood
- Stain: One coat of a semi-transparent stain
- Clear coats: One coat of Awlwood clear primer and two coats of Awlwood satin marine-grade urethane
- Completed: November 2026


Why we were called
The mahogany door unit had been coated with a product that was not suited to the wood. A fresh coat over the wrong finish would not have fixed it, so the old clear coats and stain had to come off completely before anything new went on.
Refinishing a mahogany front door down to raw wood
- Removed the existing clear coats and stain from the door, sidelights, transoms and trim, down to raw wood
- Sanded every panel, muntin and frame piece smooth
- Applied one coat of a semi-transparent stain to even out the color of the mahogany
- Applied one coat of Awlwood clear primer
- Finished with two coats of Awlwood satin marine-grade urethane
Stripping to raw wood lets the stain soak into the mahogany itself, and the new clear coats bond to the wood instead of to an old finish. Most of the time on this job went into the prep: the sanding alone took about seven days. See more about our front door and shutter refinishing.
What the homeowner said
“It took them 7 days to sand it down to raw wood, making it perfect. The seal looks great. Amazing job, great employees. Started on time, worked all day, very respectful.”
Homeowner, St. Simons Island
Read the full review on Google
Questions about a project like this
Can a mahogany front door be refinished instead of replaced?
Yes. On this door we removed the old finish down to raw wood, then stained it and built new clear coats. The door, sidelights and transoms stayed in place.
How long does it take to refinish a wood entry door?
It depends on the size of the unit and how much old finish has to come off. This door, with sidelights, transoms and trim, took about seven days of sanding before the stain and clear coats went on.
What finish did you use on the mahogany?
One coat of a semi-transparent stain, one coat of Awlwood clear primer and two coats of Awlwood satin marine-grade urethane.
Planning a similar project on St. Simons Island?
If your wood front door has a worn or failing finish, we can look at it and give you a written estimate at no charge. See our exterior painting on St. Simons Island and more of our work on St. Simons Island.
More projects nearby: a Whirlpool exterior repaint near the King and Prince and an exterior trim repaint in Sea Palms.
Every project is backed by our 3-Year Coastal Warranty. Creating delighted customers since 1986.











